B1 Braid Nozzle Band

B1 Braided Leads at Gap

B2 Braided Leads Nozzle Band

B2 Braided leads out thickness

B3 Braided leads Nozzle Band

B3 Braid over leads exiting top metal

B4 Braid Nozzle Band

B4 Braided leads 90′ Low-Profile

B5 Braid Nozzle Band

B4 Braided leads 90′ Low-Profile

All Nozzle Band heaters are available with and without Stainless Steel lead protection.

Mineral Insulated and Mica Nozzle Band Heaters: Standard One Piece Construction designs.

Nozzle Band Two Piece: Two piece construction is available for easy installation and removal.

  • Please specify total wattage when ordering
  • Min. I.D. 3”
  • Terminal Box: Terminal boxes are excellent for preventing electrical shock or electrical shorts.
    • Terminals boxes are available on any clamping or construction style.
    • 1.5” wide x 2.5” long x 1.87” deep.
  • Holes: Band Heaters can be manufactured with custom holes or slots for thermocouples or special mounting needs.
    • Please supply drawing or sketch for exact hole locations.
    • Specify location in terms of degrees and size of hole.
    • Minimum of 1/2” is required from the hole to the edge of the heater.
  • Euro Plug: European type plugs are available upon request.
    • 1” x 1.75” x 1”
  • Expandable: Expandable Mica Heaters allow you to open the heaters to the diameters of the barrel for easy installation.
    • Min. I.D. 3”
    • Heaters should only be opened all the way one time.
  • Box: Box or rectangular heaters are efficient for heating dies on plastic extruders or the barrels of twin extruders.
    • They can be manufactured in one or two piece construction
    • Please supply detailed drawings or sample part when ordering or for quoting.
  • Special Contruction Options:
    • Three phase construction for high wattage heaters.
    • Dual voltage wiring allowing the heater to run on either voltage at the same wattage is available on any clamping or termination design.
    • Ground lead or terminal is available on any design.
    • Ceramic terminal covers.
    • Internal Type J or Type K thermocouples are available for close temperature monitoring.
    • Box and irregular shaped heaters can be designed to your specifications. Please supply drawing on all special orders.
    • Bayonet adapter for thermocouples.

Nozzle Band Heater Applications:

  • Plastic Injection Molding Machines
  • Plastic Extrusion Machines
  • Blown Film Dies
  • Extrusion Dies and Cross Heads
  • Blow Molding Machines
  • Hot Runner Molds
  • Food and Candy Extruders
  • Vending Machines
  • Metallurgical Analyzers
  • Pulp and Paper Processing Equipment
  • Hot Melt Equipment
  • Nozzle Heating